198000144 - 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 0010T20 ENGINE COOLANT - CHANGE 1. Undo the bolts fixing the rigid supply pipe to the engine oil heat exchanger.2. Undo the bolt fixing the water pump rigid inlet pipe to the cylinder head. 1. Loosen the band and disconnect the coolant outlet hose from the radiator.2. Undo thebolt and move the connector bracket aside.3. Undo the bolts fixing the water pump rigid inlet pipe to the cylinder head. 1. Loosen the bands, disconnect the hose from the connector on the thermostat and remove the water pump rigid inlet pipe. - Loosen the band and disconnect the hose from the water pump rigid inlet pipe. Refitting ( Removing ) - Connect the hose to the water pump rigid inlet pipe using the band.- Place the water pump rigid inlet pipe in position and tighten the bolts fixing it to the cylinder head.- Place the connector bracket in its housing and secure it using the bolt.- Connect the coolant outlet hose, thermostat side, to the radiator and tighten the band.- Tighten the bolts fixing the rigid supply pipe to the engine oil heat exchanger.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T20 ENGINE COOLANT - CHANGE - Remove the vehicle from the lift.