198000203 - 3340B67 RIGID PIPE FROM CONNECTOR TO RIGHT REAR BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Unscrew the brake fluid reservoir cap and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

    Op. 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .    Op. 1076B30 FRONT EXHAUST SILENCER - R + R     Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R    Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 7055B45 RIGHT REAR WHEEL ARCH LINER - R.R    Op. 1040A14 FUEL TANK - R + R FOR REPLACEMENT 1. Undo connector (1a) and open retaining clips (1b). 1. Open retaining clips (1a), undo connector (1b) and remove rigid pipe (1c). Refitting ( Removing ) - Place the rigid pipe in position, secure it using the clips and tighten the connectors to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

    Op. 1040A14 FUEL TANK - R + R FOR REPLACEMENT     Op. 7055B45 RIGHT REAR WHEEL ARCH LINER - R.R    Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 1076B30 FRONT EXHAUST SILENCER - R + R     Op. 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.