198000231 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 0010T40 CHANGE MANUAL GEARBOX OIL     Op. 0010T10 CHANGE ENGINE OIL     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 3310A60 FRONT BRAKE PADS - REPLACE     Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R.    Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R.    Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R     Op. 5530A10 ALTERNATOR - R+R     Op. 5530A40 ALTERNATOR BRACKETS/MOUNTING/SPACER - R.R     Op. 2710A35 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R.R    Op. 1076B20 REAR EXHAUST SILENCER - R + R - For versions without DPF only:    Op. 1080B62 CATALYTIC CONVERTER - R + R - For versions with DPF only:    Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1032C43 TIMING BELT TENSIONER SUPPORT - R.R. WITH TIMING BELT REMOVED    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED 1. Remove the protection, undo the bolt (1a) and remove the engine components single belt lower fixed tensioner (1b). 1. Undo the bolts (1a) and remove the support (1b). 1. Remove the cartridge engine oil filter using a suitable tool.2. Remove the engine oil heat exchanger connector. 1. Undo the bolts (1a) and remove the crankshaft oil seal front cover (1b).- Remove the gasket. - At the bench, release and remove the crankshaft front oil seal cover.

Take care not to damage the oil seal seal during its removal.The oil seal is destroyed during the removal operation.It must therefore always be replaced.

Refitting ( Removing ) - Place a new gasket back in position.- Place the crankshaft front oil seal cover in its housing and secure it tightening the new bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft oil seal front cover	Bolt (to be replaced)	M6	0.8 ÷ 1.0	1.9 JTD

- Fit a new the crankshaft front cover oil seal in the housing using the tool.

Tool	Description	Function	Validity
1871000500	Fitting tool	Fitting crankshaft front oil seal	1.9 JTD

- Tighten the heat exchanger connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil heat exchanger	Connector	M20	5.4 ÷ 6.6	1.9 JTD

- Place the oil filter in its housing and tighten it fully by hand after having lubricated the gasket using engine oil.- Fit the support in its housing and secure it using the bolts.- Place the engine components single drive belt lower fixed tensioner, tighten the bolt and fit the protection.     Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED     Op. 1032C43 TIMING BELT TENSIONER SUPPORT - R.R. WITH TIMING BELT REMOVED    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R - For versions without DPF only:    Op. 1080B62 CATALYTIC CONVERTER - R + R - For versions with DPF only:    Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.    Op. 1076B20 REAR EXHAUST SILENCER - R + R     Op. 2710A35 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R.R    Op. 5530A40 ALTERNATOR BRACKETS/MOUNTING/SPACER - R.R     Op. 5530A10 ALTERNATOR - R+R     Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R     Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R.    Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R.    Op. 3310A60 FRONT BRAKE PADS - REPLACE     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T10 CHANGE ENGINE OIL     Op. 0010T40 CHANGE MANUAL GEARBOX OIL - Remove the vehicle from the lift.