According to the logic described previously, the Body Computer M1 supplies the boot courtesy light G40 and the passenger sun visor light G32, from pin 45 of connector E, and the glove compartment light G30 from pin 16 of connector H.The Body Computer M1 receives a direct supply from the battery via the line protected by maxifuse B99 at pin 18 of connector F of the interface with the junction unit under the dashboard B2; the ignition-controlled supply (INT) reaches pin 9 of connector F of the interface with the junction unit B2.The boot opening switch located in lock N47 sends an earth signal with the boot open and turns on courtesy light G40. a similar signal is sent to the Body Computer - pin 42 of connector A. this is an NC signal: signal present indicates boot closed, signal absent indicates boot open;The lights in the visor G32 and the compartment G30 are switched on by an earth signal from the switch on the actual lights.