198002067 - 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R

Removing ( Refitting )

If the fuel pressure sensor is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R1. Disconnect the electrical connection from the fuel pressure sensor on the fuel manifold.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

2. Undo the fuel pressure sensor from the fuel manifold and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in position on the fuel manifold and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure sensor - fuel manifold side	-	-	6.5 ÷ 7.5	1.9 JTD

- Secure the electrical connection to the fuel pressure sensor on the fuel manifold.    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R