198002071 - 1060G50 THROTTLE BODY - R.R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R1. Undo the bolts fixing the E.G.R. solenoid exhaust gas outlet hose, E.G.R. solenoid side.2. Undo bolts (2a) and remove throttle body (2b), having disconnected electrical connection (2c).

	Description	Connector
2c	Integrated throttle body actuator	See N075 BUILT-IN THROTTLE BODY ACTUATOR

- Remove the gasket. - Working at the bench, undo the bolts and separate the throttle body from the E.G.R. solenoid valve exhaust gas outlet hose. Refitting ( Removing ) - Fit the throttle body to the E.G.R. solenoid exhaust gas outlet and secure using the bolts.- Place the gasket back in its housing.- Connect the electrical connection to the throttle body, then place it back in its housing and secure it by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Throttle body	Bolt	M6	0.6 ÷ 0.9	1.9 JTD 8v

- Tighten the bolts fixing the exhaust gas outlet hose from the E.G.R. solenoid valve, E.G.R. solenoid valve side.    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R