1080B64 CATALYTIC CONVERTER EXCESS TEMPERATURE THERMOCOUPLE - R + R - Fiat - NUOVA BRAVO - eLearn

198002088 - 1080B64 CATALYTIC CONVERTER EXCESS TEMPERATURE THERMOCOUPLE - R + R

) - Position the vehicle on a lift.1. Disconnect the electrical connection for the thermal coupling signalling the overheating of the catalytic converter.

	Description	Connector
1	Upstream particle filter (DPF) temperature sensor	See K189 UPSTREAM PARTICULATE FILTER TEMPERATURE SENSOR (DPF)

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Undo the connector and remove the catalytic converter overheating thermal coupling.

Refitting ( Removing

) - Position the catalytic converter excessive temperature signal thermocoupling in its housing and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Thermocouple signalling catalytic converter overheating	Connector	M14	4.1 ÷ 5.0	1.9 JTD

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect the electrical connection for the thermal coupling signalling the overheating of the catalytic converter.- Remove the vehicle from the lift.