198002148 - 4110D20 STEERING ELECTRICAL CONTROL DEVICE - R R

Removing ( Refitting ) - Straighten the front wheels, then engage the first steering lock to the right and remove the ignition key.

Check that the steering is completely locked in order to avoid accidental rotation.

- Keep the steering column adjustment lever closed during all the removing-refitting stages.    Op. 5580C18 AIR BAG MODULE - R+R     Op. 4110A10 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECKS

The electric steering control device outer casing can reach very high temperatures after repeated full-load manoeuvres (parking or repeated operations at low speed); it is advisable to check how hot it is before touching it.

    Op. 7040A26 STEERING COLUMN TRIM - R+R     Op. 5550A10 STALK UNIT ASSEMBLY - R+R     Op. 7040A37 FUSE BOX COVER IN INSTRUMENT PANEL - R.R     Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R     Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.- Where fitted:    Op. 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.1. Undo bolt (1a) fixing the steering column to steering box pinion (1b). 1. Disconnect the electrical connections from the electric steering control unit.

	Description	Connector
1	Electric steering control unit	See M086 ELECTRIC STEERING CONTROL UNIT

1. Undo bolts (1a) and remove steering column (1b) from the crossmember under the dashboard.

The electric steering control device weighs around 11Kg. It is therefore advisable to take care when removing it.

With regards to moving the electric steering control device, follow the instructions given in Unit 41 - CAUTIONS and WARNINGS.

1. Undo bolt (1a) and disconnect intermediate spindle (1b) from steering column (1c). Refitting ( Removing ) - Connect the intermediate spindle to the steering column and secure it with the bolt.

The intermediate shaft fork must be fitted fully home onto the electric steering control device output shaft only after having extracted the locking bolt from its housing. The retaining bolt must be correctly inserted inside its housing after having inserted the fork into the electric steering control device output shaft. An error in the insertion of the intermediate shaft fork into the output shaft or in the positioning of the safety bolt in its housing could cause the disconnection of these components and a lack of steering.

- Bring the steering control shaft to its minimum length and connect the lower fork to the steering box pinion.

With regards to moving the electric steering control device, follow the instructions given in Unit 41 - CAUTIONS and WARNINGS.

- Place the steering column in position and secure it to the crossmember under the dashboard, tightening the bolts to the recommended torque.

The electric steering control device weighs around 11Kg. It is therefore advisable to take care when refitting it.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to under dashboard crossmember	Bolt	M8	2.0 ÷ 2.4

- Connect the electrical connections for the electric steering control unit.- Connect the steering column to the steering box pinion and secure by tightening the new bolt to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to steering box pinion	Bolt (to be replaced)	M10	5.0 ÷ 6.0

If a new electric steering control device has been fitted, remove the anti-rotation lock that comes with the new unit.

    Op. 5550A10 STALK UNIT ASSEMBLY - R+R     Op. 7040A26 STEERING COLUMN TRIM - R+R     Op. 4110A10 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECKS     Op. 5580C18 AIR BAG MODULE - R+R - Where fitted:    Op. 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.    Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R     Op. 7040A37 FUSE BOX COVER IN INSTRUMENT PANEL - R.R - If the electric steering control device has been replaced, connect an Examiner and carry out the fitting check procedure.