5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R. - Fiat - NUOVA BRAVO - eLearn

198002300 - 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.

)

Before removing and refitting the Air Bag module the following preliminary operations must be carried out.- Turn the ignition key to the OFF position and extract it;- Disconnect the battery leads and insulate them.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS Op. 5580C AIR BAG SYSTEM

Op. 7040L37 GEAR LEVER TRIM - R.R Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R. Op. 7040L70 TUNNEL COVER REAR TRIM - R.R. Op. 7040L20 TUNNEL COVER - R.R - Remove the left side closure. Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R. Op. 7040A37 FUSE BOX COVER IN INSTRUMENT PANEL - R.R 1. Undo the bolts.2. Move the Air Bag module.

1. Detach the electrical connection.

	Description	Connector
1	DRIVER''S KNEE AIR BAG	See Q014 DRIVER'S SIDE KNEE BAG

2. Keep the Air Bag module.

Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) - Observe the following precaution.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2007 for 2021).

- Connect the electrical connection and position the Air Bag module.1. Tighten the bolts.

Component	Fastening	dia	Value (daNm)	Validity
Knee Bag module	Bolt	M6	0.6 ÷ 1.0

Op. 7040A37 FUSE BOX COVER IN INSTRUMENT PANEL - R.R Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R. Op. 7040L20 TUNNEL COVER - R.R Op. 7040L70 TUNNEL COVER REAR TRIM - R.R. Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R. Op. 7040L37 GEAR LEVER TRIM - R.R - Connect the battery.- Check, using the Examiner, that the system has not- Acquired errors during the operation.