7005A14 FRONT SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT - Fiat - NUOVA BRAVO - eLearn

198002314 - 7005A14 FRONT SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT

1. If the adjustment is carried out after having removed the door, tighten the hinge bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Moving hinges on fixed	Bolt	M6	1.4 ÷ 1.6

- Remove the door striker. Op. 7005B14 FRONT SIDE DOOR LOCK STRIKER - R.R - If necessary, tighten the bolts securing the hinges to the door and body.2. Unscrew check strap bolt (2a) and close the door temporarily to return link (2b).

- Initially adjust the door inside the door compartment. To do this, the bolts securing the hinges to the body must be loosened.- Proceed as follows on the upper hinges:- Upper left hinge. Op. 7040A37 FUSE BOX COVER IN INSTRUMENT PANEL - R.R Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.- Upper right hinge. Op. 7040A14 FLAP FOR GLOVE COMPARTMENT IN DASHBOARD - R.R. Op. 7040G22 BULB HOLDER/SWITCH FOR COMPARTMENT LIGHT IN DASHBOARD - R.R. Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R. Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R. Op. 7040L37 GEAR LEVER TRIM - R.R Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R. Op. 7040L70 TUNNEL COVER REAR TRIM - R.R. Op. 7040L20 TUNNEL COVER - R.R Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R. Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE - Proceed as follows to undo the lower hinges. Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. 1. Loosen bolts (1a) securing hinges (1b) to the body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned in the door compartment.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door hinges to body	Bolt	M8	2.9 ÷ 3.5

- Refit the components removed to access the hinge retaining bolts.- If necessary, align the door with the wing and rear door as follows.- Open the door.1. Loosen bolts (1a) securing hinges (1b) to the body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned with the wing and front door.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Hinges to door	Bolt		4.1 ÷ 4.9

4. Remove link (4a) and tighten bolt (4b) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door detent link (body side)	Bolt	M8	2.0 ÷ 3.0

- Refit and adjust the door striker. Op. 7005B14 FRONT SIDE DOOR LOCK STRIKER - R.R - Touch up the paint in the hinge half area.- Check that the striker and the door lock are correctly matched and that the alignment is correct with the door closed.