198002354 - 7010A14 REAR SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT

1. If the adjustment is carried out after having removed the door, tighten the hinge bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear door electric window	Nut	M6	0.7 ÷ 1.1

    Op. 7010B14 REAR SIDE DOOR LOCK STRIKER - R.R - If necessary, provisionally tighten the bolts securing the hinges to the door and body.2. Unscrew bolt (2a) of door check strap and close the door temporarily to return rod (2b). - Initially adjust the door within the door compartment. To do this, the bolts securing the hinges to the body must be loosened.    Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R 1. Loosen bolts (1a) securing hinges (1b) to body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned in the door compartment.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door hinges to body	Bolt	M8	2.9 ÷ 3.5

- Refit the components removed in order to access the bolts securing the hinge.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. - If necessary, align the door with the wing and front door as follows.- Open the door.1. Loosen bolts (1a) securing hinges (1b) to body.2. Adjust the door position by means of the slotted bolt holes until it is correctly aligned with the wing and front door.

It is advisable to work on one hinge at a time. The arrows indicate the possible movements for the adjustment.

3. After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear door electric window	Nut	M6	0.7 ÷ 1.1

4. Remove link (4a) and tighten bolt (4b) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Door detent link (body side)	Bolt	M8	2.0 ÷ 3.0

- Refit and adjust the door striker.    Op. 7010B14 REAR SIDE DOOR LOCK STRIKER - R.R - Touch up the paint in the hinge half area.- Check that the striker and the door lock are correctly matched and that the alignment is correct with the door closed.