7010M26 ELECTRIC WINDOW OPENING MECHANISM FOR ONE REAR DOOR LH OR RH - R.R - Fiat - NUOVA BRAVO - eLearn

) Op. 7010M10 REAR SIDE DOOR ELECTRICALLY OPERATED WINDOW SWITCH (ONE), LEFT OR RIGHT - R.R Op. 7010E38 REAR SIDE DOOR INTERIOR HANDLE-R R Op. 7010E10 REAR SIDE DOOR INNER PANEL - R.R. OR REPLACE Op. 5570T93 REAR SIDE LOUDSPEAKER. (ONE), LEFT OR RIGHT - R.R. WITH REAR DOOR PANEL OR WING. REMOVED Op. 7010A04 REAR SIDE DOOR WATER GUARD PROTECTION - R R OR ARRANGE WITH DOOR PANEL REMOVED 1. Provisionally connect the window switch unit to the electrical connection (1a), then move the window (1b) until the glass retainer (1c) is in an accessible position (as in the figure).2. Release the retainer (1c) from the opening (2a) for the window, pushing it outwards.3. Raise the window by hand until it is in the end of travel position, then secure it safely using a retainer (3a).4. Detach the electrical connection.

	Description	Connector
4	LEFT REAR ELECTRIC WINDOW MOTOR	See N065 LEFT REAR ELECTRIC WINDOW MOTOR
4	RIGHT REAR ELECTRIC WINDOW MOTOR	See N066 RIGHT REAR ELECTRIC WINDOW MOTOR

5. Loosen the nuts fixing the window opening mechanism.6. Extract the window opening mechanism (6a) from the housing (6b).

) - Check that the window opening mechanism is not damaged.1. Place the window opening mechanism (1a) in position and tighten the nuts (1b).

Component	Fastening	dia	Value (daNm)	Validity
Rear door electric window	Nut	M6	0.7 ÷ 1.1

2. Secure the electrical connection.3. Lower the window manually and attach the opening (3a) and the drive pin (3b) for the window opening mechanism.