7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. - Fiat - NUOVA BRAVO - eLearn

198002459 - 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.

) - Move the front seat into the front end of travel position and raise it completely.1. Working on the outside of the seat, remove the trim (1a) releasing the inner retainers (1b) using the special tool.

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

2. Undo the bolt (2a) securing the end of front seat belt (2b) to the seat.

1. Loosen the rear retaining bolts.

- Place the seat in the rear end of travel position.1. Release the retainer.2. Remove the cover, releasing the internal retainers.3. Detach the electrical connection.

	Description	Connector
3	DRIVER''S SEAT COUPLING	See D070 DRIVER'S SEAT COUPLING
3	PASSENGER SEAT COUPLING	See D071 PASSENGER SEAT COUPLING

4. Loosen the front bolts.5. Remove the seat (5a) after having released the wiring (5b) retaining band.

If the seat has a Side Bag, move it handling the seat only and only in the area of the head restraint and at the front of the cushion.

Refitting ( Removing

) - Check that the seat is not damaged.- Place the seat with the guides in the rear end of travel position.1. Engage the wiring retaining band.2. Screw in and tighten the inner front fixing bolt.

Component	Fastening	dia	Value (daNm)	Validity
Front seat	Bolt	M10	3.2 ÷ 3.8

3. Screw in the outer front bolt without tightening it.4. Connect the electrical connection (4a), the place the cover (4b) in position and fastent it using the retainer (4c).- Place the seat in the front end of travel position.5. Screw in and tighten the inner rear fixing bolt.

Component	Fastening	dia	Value (daNm)	Validity
Front seat	Bolt	M10	3.2 ÷ 3.8

6. Screw in the outer rear bolt (6a) without tightening it.

The seat should be fastened to the floor without distortions to the sliding guides. If necessary, adjust the floating nuts (6b), making sure that they are free.

- Check that the seat slides correctly; slide and attach the seat several times and check that the catches click home simultaneously into both guides.7. Screw in and tighten the outer rear bolt.

Component	Fastening	dia	Value (daNm)	Validity
Front seat	Bolt	M10	3.2 ÷ 3.8

8. Screw in and tighten the outer front bolt.

Component	Fastening	dia	Value (daNm)	Validity
Front seat	Bolt	M10	3.2 ÷ 3.8

1. Position the end of the front seat belt (1a) on the front seat and screw in the bolt (1b), then tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Seat belt bracket to seat	Bolt	7/16 "	3.6 ÷ 4.4

2. Position the trim (2a) for the seat belt (2b) and engage the retainers.

- Check that the seat slides correctly; slide and attach the seat several times and check that the catches click home simultaneously into both guides.