198002816 - 5530A24 ALTERNATOR VOLTAGE REGULATOR - R.R. WITH ALTERNATOR REMOVED

Removing ( Refitting ) 1. Prise up cover (1a) protecting the alternator electronic components by undoing the three retaining clips (1b). 1. Undo nut (1a), remove flexible washer (1b) and bush (1c).2. Undo nut (2a) and recover washer (2b). 1. Undo the two bolts (1a) and remove voltage regulator (1b). Refitting ( Removing ) - Check that the voltage regulator is not damaged.- Carefully clean the field winding on the alternator.1. Remove brush protective cover (1a) by lifting it enough to facilitate the insertion of brushes (1c) in place on the alternator. - Insert the voltage regulator onto the alternator and secure with the bolts.- Fit the brush protective cover.- Position the washer and tighten the nut.- Position the bush and flexible washer, then tighten the nut.- Fit the cover protecting the electronic part of the alternator and engage the three retaining clips.