7065A34 PASSENGER PRESENCE SENSOR ON FRONT SEAT FOR INDICATING SEATBELT UNFASTENED R R - Fiat - NUOVA BRAVO - eLearn

198002859 - 7065A34 PASSENGER PRESENCE SENSOR ON FRONT SEAT FOR INDICATING SEATBELT UNFASTENED R R

) - Remove the passenger seat. Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. 1. Disconnect retainers (1a) for wiring (1b) for the passenger presence sensor.

1. Working on the electrical connection for the seat, release retainer (1a) and remove cover (1b) by sliding it along the guides.2. Release retainers (2a) and remove electrical connection (2b) for the seat passenger presence sensor.

Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED- Separate the cover from the cushion padding.1. Remove carpet (1a) by detaching the adhesive surface from the padding, having cut retaining rings (1b) using clippers.

1. Remove the passenger presence sensor, detaching the adhesive surface from the padding.2. Extract braid (2a) for sensor via opening (2b).3. Keep the passenger presence sensor.

Refitting ( Removing

) - Check that the passenger presence sensor is not damaged.1. If the sensor removed previously is being reused, apply spray glue for plastics to adhesive area (1a), having fitted protection for sensors (1b).2. If a new sensor is being used, remove protective film (2a) from the adhesive section.3. Place sensor (3a) in position, centring it on references (3b).4. Insert wiring (4a) in housing (4b).

- If the carpet has been removed, apply spray glue for plastics to the adhesive area, then place it on the padding and stick the adhesive section to the padding.Fit the rings securing the carpet to the padding using special pliers.- Connect the cover to the cushion padding. Op. 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. - Insert the anchorage link electrical connection into the electrical connection for the seat and engage the retainers.- Insert the cover into its housing by sliding it along the guides, then engage the retainer.- Connect the retainers for the passenger presence sensor wiring. Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.