198003024 - 1016E38 SINGLE CYLINDER HEAD OR (ONE) LEFT OR RIGHT, REMOVED - GRINDING

- Check that the planarity of the lower cylinder head plane corresponds to the recommended values.
MeasurementValueValidity
Engine cylinder head lower surface flatness (mm)< 0.1
a - The head may be levelled to 0.1 m if starting from a gasket with no references and using a new gasket with one reference.b - The head may be levelled to 0.2 m if starting from a gasket with no references and using a new gasket with two references.c - The head may be levelled to 0.1 m if starting from a gasket with one reference and using a new gasket with two references.
When within limit conditions (head gasket with 2 references before levelling), the lower head surface cannot be levelled.
MeasurementValueValidity
Cylinder head nominal height (mm)140.85 ÷ 141.151.9 JTD 8v