5. Lower the left side trim (4b) without releasing it from the rear seat belt (5a).- Also lower the right rear side trim, repeating the operations in points 1 to 5.
1. Release the door housing seals in the area of the left upper centre pillar cover.2. Release the bolt cover.3. Undo the bolt.4. Move the left upper pillar cover (4a) by releasing internal retainers (4b).5. Lower the upper pillar cover (4a), without releasing it from the seat belt (5a).- Also lower the right upper centre pillar cover, repeating the operations in points 1 to 5.
1. Prise up the rear door housing seal in the area of the roof lining.2. Undo the bolts (2a) and remove side courtesy light housings (2b).
1. Gently lower the roof lining.2. Disconnect the connection for the aerial lead.3. Undo the special nut with the split washer.
1. Working from outside the vehicle, remove the aerial mounting and wiring
Refitting
(
Removing
)
- Check that the aerial mounting is not damaged.- Fit the wiring, then position the aerial mounting and secure it from the inside using the special nut.- Connect the connection for the aerial lead.- Position the roof lining.- Position the side courtesy light housings and tighten the bolts.- Positino the roof lining and fit the rear door housing seal in the area of the roof lining.- Lift up the left upper centre pillar cover.Position the let upper centre pillar cover and engage the inner retainers.Tighten the bolt.Fit the bolt cover.Fit the door housing seals.- Lift up the right upper centre pillar cover.Position the let upper centre pillar cover and engage the inner retainers.Tighten the bolt. Fit the bolt cover.Fit the door housing seals.- Position the left rear side cover.Position the left rear side cover and attach the inner retainers.Tighten the bolts securing the cover.Position the backrest retainer striker panel and engage the retainers.Fit the seals for the rear door housing and tailgate housing.- Position the right rear side cover.Position the left rear side cover and attach the inner retainers.Tighten the bolts securing the cover.Position the backrest retainer striker panel and engage the retainers.Fit the seals for the rear door housing and tailgate housing. Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R. Op. 7040H80 REAR PARCEL SHELF - R.R. Op. 7040E14 L/H OR R/H SIDE COURTESY LIGHT (ONE) - R+R Op. 7065C30 GRAB HANDLE (ONE) LEFT, RIGHT OR CENTRE PASSENGER COMPARTMENT INTERIOR - R.R
Removing
(
Refitting
)
- Remove the rear handles. Op. 7065C30 GRAB HANDLE (ONE) LEFT, RIGHT OR CENTRE PASSENGER COMPARTMENT INTERIOR - R.R - Remove the left and right courtesy lights. Op. 7040E14 L/H OR R/H SIDE COURTESY LIGHT (ONE) - R+R Op. 7040H80 REAR PARCEL SHELF - R.R. Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.1. Release the seals (1a) for the rear door housing (1b) and the tailgate housing in the area of the remaining left rear trim.2. Remove the trim (2a) from the backrest retainer striker.3. Undo the bolts securing the left side cover.4. Release the inner retainers (4a) for the side trim (4b) using the special tool.
