198003619 - 5505A14 SUPPLEMENTARY JUNCTION BOX IN LUGGAGE COMPARTMENT - R.R

Removing ( Refitting )     Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H80 REAR PARCEL SHELF - R.R.     Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.    Op. 7040H66 LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R . - Or, alternatively    Op. 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R .     Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R. 1. Remove the rivets using a drill.2. Move the junction unit.
1. Mark the reciprocal position of all terminals connected to the junction unit.Disconnect the terminals from the junction unit using the extractor kit.
ToolDescriptionFunctionValidity
2000018600Extractor kitExtracting electrical cable terminals
2. Keep the junction unit.
Refitting ( Removing ) - Check that the junction unit is not damaged.- Use the extractor kit to connect the terminals to the junction unit in accordance with the layout defined during the removal.- Position the junction unit and fit the rivets.    Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R.     Op. 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R .     Op. 7040H66 LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R .     Op. 7040G30 BOOT LIGHT BULB HOLDER - R.R.    Op. 7040H80 REAR PARCEL SHELF - R.R.     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R