198003638 - 7030B49 SLIDING ROOF FRONT ANTI-WIND NOISE GASKET - R R
Removing
(
Refitting
)
FRONT SEAL- Using the opening control, place the sliding transparent panel in the second opening position.1. Remove the front weatherstrip (1a) from its housing, detaching the lower adhesive part from the surface (1b) of the frame and releasing it from the connections (1c) for the side weatherstrips (1d). | The seal is destroyed when it is removed because the adhesive part can no longer be reused so a new seal must be refitted. |
| The seal is destroyed when it is removed because the adhesive part (1c) can no longer be reused so a new seal must be refitted. |
Refitting
(
Removing
)
FRONT SEAL- Check that the new front weatherstrip is not damaged.1. Clean any residues of adhesive and degrease the front weatherstrip fastening surface (1a). Take care not to scratch the paintwork.2. Place the front weatherstrip (2a) in position and attach it to the side seals (2b), then gradually remove the protection (2c) and stick the adhesive part to the surface (1a).