Refitting
(
Removing
)
- Check that the front weatherstrip is not damaged.1. Clean the adhesive residues and degrease the housing (1a) for the centre weatherstip (1b). Take care not to scratch the paintwork.2. If the seal that was removed previously is being reused, remove the adhesive (2a) from the actual seal as far as possible.3. Degrease the lower surface (3a) of the seal (1b) along the entire length.4. Apply a thin layer of silicon adhesive (4a) to the entire housing (1a) for the seal.5. Place the centre weatherstrip (1b) in position and stick it to the silicon adhesive strip (4a).Wait for the length of time recommended by the supplier of the silicon adhesive.
- Close the sun roof and check that the centre weatherstrip is in the correct position.
Removing
(
Refitting
)
Op. 7030B18 SLIDING ROOF GLASS PANEL - R+R 1. Remove the centre weatherstip (1a), detaching the adhesive strip (1b) from the housing (1c).
