198003657 - 5580H10 PARKING OBSTACLE DETECTION DEVICE ELECTRONIC CONTROL UNIT - R.R.
Removing
(
Refitting
)
- Lift up the rear seat cushion.1. Lift up the centre edge (1a) of the rear carpet.2. Undo the nuts (2a) and remove the control unit (2b).3. Disconnect the electrical connections (3) and (3b) for the control unit.| Description | Connector | |
|---|---|---|
| 3 | PARKING SENSOR CONTROL UNIT | See M084 PARKING SENSOR CONTROL UNIT |
Refitting
(
Removing
)
- Check that the control unit is not damaged.- Connect the electrical connections for the control unit.- Position the control unit and tighten the nuts.- Position the edge of the rear carpet.- Lower the rear seat cushion into place.