198003797 - 4450B92 FRONT TYRES PRESSURE TRANSMITTER, (ONE) LH OR RH - R R

Removing ( Refitting )
The procedure for the right front tyre pressure sender unit is described below; proceed in the same way for the left one.
- Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. 1. Disconnect the electrical connection for the front tyre pressure sender unit.
DescriptionConnector
1Tyre inflation pressure control unit aerial    See P012 TYRE PRESSURE CONTROL UNIT ANTENNA
2. Remove the rivets using a suitable tool.3. Remove the front tyre pressure sender unit.
Refitting ( Removing ) - Check that the front tyre pressure sender unit is not damaged.- Place the front tyre pressure sender unit in position and secure it using new rivets.- Connect the electrical connection for the front tyre pressure sender unit.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the vehicle from the lift.- Carry out the self-learning procedure for the front tyre pressure sender unit using the Examiner.