4450B93 REAR TYRES PRESSURE TRANSMITTER, (ONE) LH OR RH - R R - Fiat - NUOVA BRAVO - eLearn

198003798 - 4450B93 REAR TYRES PRESSURE TRANSMITTER, (ONE) LH OR RH - R R

)

The procedure for the right rear tyre pressure sender unit is described below; proceed in the same way for the left one.

- Position the vehicle on a lift. Op. 4450B08 RIGHT REAR WHEEL - R.R - Remove the rear fastenings for the right rear wheel arch liner, with reference to Op. 7055B45 RIGHT REAR WHEEL ARCH LINER - R.R 1. Disconnect the electrical connection for the rear tyre pressure sender unit.

	Description	Connector
1	Tyre inflation pressure control unit aerial	See P012 TYRE PRESSURE CONTROL UNIT ANTENNA

2. Undo the bolts (2a) and remove the rear tyre pressure sender unit (2b).

Refitting ( Removing

) - Check that the rear tyre pressure sender unit is not damaged.- Place the rear tyre pressure sender unit in position and tighten the bolts.- Connect the electrical connection for the rear tyre pressure sender unit. - Tighten the rear fastenings for the right rear wheel arch liner, with reference to Op. 7055B45 RIGHT REAR WHEEL ARCH LINER - R.R Op. 4450B08 RIGHT REAR WHEEL - R.R - Remove the vehicle from the lift.- Carry out the self-learning procedure for the rear tyre pressure sender unit using the Examiner.