198000063 - 3380A04 HANDBRAKE - ADJUST TRAVEL
The handbrake should only be adjusted after the rear brake pads or complete cables have been replaced. This is because the play take-up caused by wear is automatic. |
- Start up the engine and operate the brake pedal energetically at least ten times.- Place the handbrake lever in the fifth notch on the toothed sector.- Tighten the adjustment nut on the handbrake lever until the rear wheels are not braked.- Check that the wheels are free to turn with the lever in the rest position.- Switch off the engine. Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.- Remove the vehicle from the lift.