198000095 - 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R

Removing ( Refitting ) - Fold the rear seat cushions over.1. Undo the bolts (1a) and remove the access cover to the fuel pump assembly (1b).
1. Disconnect the electrical connection (1a) and disconnect the rapid connectors for the rear fuel pipes (1b).
DescriptionConnector
1aFuel pump and level gauge    See N040 FUEL PUMP AND LEVEL GAUGE
1. Fit the tool (1a), undo the ring nut (1b) securing the submerged pump assembly (1c) from the tank and remove it with the seal (1d).
The seal is replaced every time the ring nut is removed from the tank.
ToolDescriptionFunctionValidity
1870736000SpannerLoosen/tighten ring nut securing fuel pump
Position a suitable container for collecting the fuel contained in the submerged pump assembly.
Refitting ( Removing ) 1. Fit a new seal on the tank.2. Place the submerged pump assembly (2a) back in its housing taking care to ensure that the arrow (2b) on the pump is aligned with the references (2c) on the tank.3. Tighten the ring nut (3a) securing the pump assembly to the recommended torque using the tool (3b).
ComponentFasteningdia  Value (daNm)Validity
Fuel pump assembly fastening ring nutRing nut-5.4 ÷ 6.6
ToolDescriptionFunctionValidity
1870736000SpannerLoosen/tighten ring nut securing fuel pump
- Connect the rapid connectors for the rear fuel pipes, pump side.- Connect the electrical connection to the fuel pump assembly.- Place the fuel pump assembly access cover back in its housing and secure it using the bolts.- Place the rear seat cushions back in their housings.