198000195 - 2125C31 GEAR SELECTION/ENGAGEMENT CABLES REACTION BRACKET - R.R.

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R1. Disconnect the gear selector and engagement cables.2. Remove the retaining clips for the gear selection cables.3. Undo the nuts and remove the reaction brackets from the gearbox. Refitting ( Removing ) - Place the brackets and fasten them by tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Gear engagement/selection cables reaction bracket	Nut	M8	2.2 ÷ 2.7	1.9 JTD

- Introduce the cables into the openings in the brackets and secure them using the retaining clips.- Using manual pressure, connect the ends of the gear selection and engagement cables to the ball joints for the levers on the gearbox.    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R