198000196 - 3310A30 FRONT BRAKE CALIPER (ONE) - R.R

Removing ( Refitting ) - Position the vehicle on a lift.- Unscrew the brake fluid reservoir cap and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

    Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Disconnect fitting (1a), remove clip (1b) and disconnect hose (1c). 1. Disconnect the electrical connection for the brake pad wear sensor.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

- Remove the electrical connection from the support and the wiring from the retaining bracket.2. Undo the connector (2a) and remove the hose (2b) by releasing it from the fastening.3. Undo the bolts (3a) and remove the brake caliper (3b). Refitting ( Removing ) - Fit the brake caliper from its seat and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake callipers	Bolt	-	3.0 ÷ 3.3

- Fit the rigid pipe and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Flexible pipe to front brakes - brake caliper side	Connector	M10	1.4 ÷ 1.8

- Connect the electrical connection for the pad wear sensor and secure the wiring using the retaining clip.- Conect the hose, secure with the clips and tighten the fitting to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.