198000306 - 4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting )     Op. 7040L20 TUNNEL COVER - R.R     Op. 3310B62 REAR BRAKE PADS - REPLACE     Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R.     Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R.1. Remove protective stud (1b) using tool (1a).

Tool	Description	Function	Validity
1847056000	Extractor	Removing rear wheel hub cap nut

1. Undo nut (1a) and remove wheel hub assembly (1b).

The bearing is built into the wheel hub and therefore cannot be separated from it.

Refitting ( Removing ) - Place the wheel hub assembly in position and tighten the new nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear wheel hub	Nut (to replace)	M22	22.4 ÷ 33.6

- Place the protective stud back in its housing.    Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R.    Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R.     Op. 3310B62 REAR BRAKE PADS - REPLACE     Op. 7040L20 TUNNEL COVER - R.R