198002017 - 1016E14 VALVE GUIDES IN SINGLE CYLINDER HEAD - REPLACE DURING OP. 1016E10

Removing ( Refitting ) 1. Remove the valve guides (1a) using the tool (1b).
ToolDescriptionFunctionValidity
1870897100Extractor/ Fitting toolExtracting/fitting valve guides Valve guide oil seal fitting1.9 JTD 16v
Refitting ( Removing ) - Check that the outer diameter of the valve guides to be fitted corresponds to the recommended figures.
MeasurementValueValidity
Valve guide outer diameter (mm)10.010 ÷ 10.0301.9 JTD 16v
MeasurementValueValidity
Valve guide outer diameter oversize (mm)0.05 - 0.10 - 0.251.9 JTD 16v
1. Fit the new valve guides (1a) using the tool (1b).
ToolDescriptionFunctionValidity
1870897100Extractor/ Fitting toolExtracting/fitting valve guides Valve guide oil seal fitting1.9 JTD 16v
- Ream the valve guide inner diameter to the recommended figure.
MeasurementValueValidity
Valve guide inner diameter (mm)5.015 ÷ 5.0331.9 JTD 16v