198002027 - 1036H55 HYDRAULIC TAPPET (ONE) - REPLACE WITH CAMSHAFT HOUSING REMOVED

Removing ( Refitting ) 1. Remove the hydraulic tappet assembly (1a) and rocker arms (1b).2. Separate the hydraulic tappet from the rocker arm, removing the fastening clip.

Arrange the hydraulic tappets on a surface free of impurities and also mark their positions on removal so that they can be refitted in the correct position.

Refitting ( Removing ) - Fit the new tappet in the rocker arm housing and fasten it using a new securing spring.- Fit the tappet - rocker arm assembly in the housing in the cylinder head.