198002046 - 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Loosen the band and disconnect the heat exchanger air outlet hose from the rigid pipe.2. Undo the bolt securing the rigid pipe to the gearbox. - Lower the vehicle.1. Open the retaining clip for the brake servo air vacuum pipe and move it to one side.2. Undo the bolts and remove the throttle casing rigid air inlet pipe. Refitting ( Removing ) - Place the throttle casing rigid air inlet pipe in position and secure it using the bolts.- Refit the brake servo vacuum pipe and close the retaining clip.- Raise the vehicle.- Tighten the bolt securing the rigid pipe to the gearbox.- Connect the heat exchanger air outlet hose to the rigid pipe and secure it using the band.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.