198002059 - 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Manually press clips (1a) and disconnect pipe from injectors to fuel recovery manifold (1b), injector side, and move aside.2. Unscrew connectors (2a) and (2b) and remove pipes from fuel manifold to injectors (2c). | Use new pipes from the fuel manifold to the injectors when refitting. |
Refitting
(
Removing
)
- Refit the pipes from the fuel manifold to the injectors in the housing and tighten the connectors to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Pipes from fuel manifold to injectors - fuel manifold side | Connector | M14 | 1.8 ÷ 2.0 | 1.9 JTD |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Pipes from fuel manifold to injectors - injectors side | Connector | M12 | 2.2 ÷ 2.4 | 1.9 JTD |