198002064 - 1060G16 EXCESS PRESSURE SENSOR - R.R.

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Undo the bolt securing the rigid oil vapour pipe on the side of the return pipe leading to the water pump.2. Loosen the collar and disconnect the oil vapour pipes. 1. Undo the bolt securing the rigid oil vapour pipe, intake chamber side, and move aside. 1. Detach the pressure relief sensor electrical connection.

	Description	Connector
	Air pressure - temperature sensor	See K044 AIR TEMPERATURE/PRESSURE SENSOR

2. Undo bolts (2a) and remove excess pressure sensor (2b). Refitting ( Removing ) - Position the excess pressure sensor in its housing and secure it using the bolt.- Secure the electrical connection for the pressure relief sensor.- Refit the oil vapour rigid pipe and tighten the bolts.- Connect the oil vapour pipes and secure the collar.    Op. 1016A10 SOUND-PROOFING COVER - R.R