198002067 - 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Undo the bolt securing the rigid oil vapour pipe, on the return pipe side, leading to the water pump.2. Loosen the collar and disconnect the oil vapour pipes. 1. Undo the bolt securing the rigid oil vapour pipe, intake chamber side, and move aside. 1. Detach the fuel pressure sensor electrical connection.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

2. Undo the fuel pressure sensor and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in position and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure sensor - fuel manifold side	-	-	6.5 ÷ 7.5	1.9 JTD

- Secure the electrical connection for the fuel pressure sensor.- Refit the oil vapour rigid pipe and tighten the bolts.- Connect the oil vapour pipes and secure the collar.    Op. 1016A10 SOUND-PROOFING COVER - R.R