198002072 - 1060G70 VACUUM RESEVOIR - R.R

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Undo the nut (1a) and move the heater plugs control unit (1b) to one side as necessary. 1. Undo nuts securing the vacuum reservoir to the mounting.- Disconnect the electrical connection for the throttle casing solenoid valve.

	Description	Connector
-	Throttle body solenoid valve	See L062 THROTTLE BODY SOLENOID VALVE

2. Disconnect the vacuum pipes (2a) and remove the vacuum reservoior (2b).

Mark the position of the pipes before removing them.

1. If necessary, undo the bolts and remove the throttle body solenoid valve (1a) from the vacuum reservoir (1b). Refitting ( Removing ) - Fit the throttle body solenoid valve on the vacuum reservior and tighten the bolts.- Connect the vacuum pipes to the vacuum reservoir.- Connect the electrical connection for the throttle casing solenoid valve.- Fit the vacuum reservoir in position and tighten the nuts.- Place the heater plugs control unit in position and tighten the nut.    Op. 1016A10 SOUND-PROOFING COVER - R.R