198002081 - 1064B52 PIPE FROM CONTROL SOLENOID TO VANE POSITION ACTUATOR ON TURBOCHARGER

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Loosen the band and disconnect the solenoid valve outlet pipe. 1. Disconnect the outlet pipe from the solenoid valve, actuator side.- Open the retaining clips and remove the pipe assembly. - If necessary, separate the pipes connected. Refitting ( Removing ) - If separated, connect the two pipes.- Refit the pipe assembly and close the retaining clips.- Connect the solenoid valve outlet pipe, actuator side.- Connect the solenoid valve outlet pipe and tighten the band.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R