198002123 - 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED

Removing ( Refitting ) 1. Undo the bolts (1a), release the protection (1b) and remove clutch hydraulic actuator (1c) complete with seal. 1. Open the retaining tabs (1a) and remove the oil seal (1b) complete with O-ring from the clutch hydraulic actuator. Refitting ( Removing ) - Fit a new oil seal complete with O-ring on the clutch hydraulic actuator and fold the retaining tabs over.- Place the hydraulic clutch actuator in position complete with protection and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Hydraulic clutch actuator	Bolt	M6	0.7 ÷ 0.9	1.9 JTD