2110C54 GEAR SELECTION AND ENGAGEMENT UNIT - OVERHAUL WITH ASSEMBLY REMOVED - Fiat - NUOVA BRAVO - eLearn

198002126 - 2110C54 GEAR SELECTION AND ENGAGEMENT UNIT - OVERHAUL WITH ASSEMBLY REMOVED

) 1. Remove the O-ring.- Position the gear selector and engagement unit in a vice fitted with protective jaws.2. Lift up the rubber protection.3. Lift up the pawl to release it from the control shaft.- Remove the gear selection and engagement unit from the vice.

1. Remove the retaining seal.2. Remove the pin.

1. Remove the pawl (1a) and the bracket (1b).2. Remove the cover.3. Remove the springs.4. Remove the bush.5. Remove the mounting.6. Remove the flange.7. Separate the rubber protection (7a) from the control shaft (7b).

- Position the support in a vice fitted with protective jaws.1. Undo the nut (1a) and remove the spring (1b).- Remove the support from the vice.

1. Remove the bush.2. Remove the pawl.3. Remove the lever.4. Release the two bushes.5. Remove the seal (5a) and the bush (5b) using a suitable tool (5c).

Refitting ( Removing

) 1. Fit the bush (1a) and the seal (1b) using a suitable tool (1c).2. Fit the two bushes.3. Fit the lever.4. Fit the pawl.5. Fit the bush.

- Position the support in a vice fitted with protective jaws.- Fit the spring and tighten the nut.- Remove the support from the vice.- Fit the rubber protection on the control shaft.- Fit the flange.- Fit the mounting- Fit the bush.- Fit the springs.- Fit the cover.1. Fit the pawl (1a) and the support (1b) as illustrated in the diagram.

- Fit the pin.- Fit the circlip.- Fit the gear selector and engagement unit in a vice fitted with protective jaws.- Connect the pawl to the control shaft.- Fit the rubber protection.- Remove the gear selection and engagement unit from the vice.- Fit a new O-Ring.