198002133 - 2125C32 GEARBOX HAND CONTROL LEVER MOUNTING - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 1076B20 REAR EXHAUST SILENCER - R + R - For versions without DPF only:    Op. 1080B62 CATALYTIC CONVERTER - R + R - For versions with DPF only:    Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.    Op. 1076A56 EXHAUST PIPE INTERMEDIATE HEAT SHIELD R R 1. Undo the bolts (1a) and remove the cover (1b) from the gearbox hand lever support. 1. Disconnect the cables (1a), remove the clips (1b) and disconnect the gear selection and engagement cables (1c) from the gearbox hand lever support. 1. If necessary, release the trim (1a), undo the bolt (1b) and remove the gear lever knob (1c). Refitting ( Removing ) - Place the knob back in position, secure it to the gear lever using the bolt and fit the trim on the knob.- Using manual pressure, connect the ends of the gear selection and engagement cables to the ball joints for the levers on the mounting.- Fit the cover for the mounting and secure it using the bolts.     Op. 1076A56 EXHAUST PIPE INTERMEDIATE HEAT SHIELD R R - For versions without DPF only:    Op. 1080B62 CATALYTIC CONVERTER - R + R - For versions with DPF only:    Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.    Op. 1076B20 REAR EXHAUST SILENCER - R + R     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R - Remove the vehicle from the lift.