2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R - Fiat - NUOVA BRAVO - eLearn

198002134 - 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

) Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R. Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R.1. Remove the staking (1a), fit the tool (1b) and undo the wheel hub fixing nut.

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front drive shaft to wheel hub

1. Undo the bolt (1a) securing the ABS rpm sensor (1b) and move it aside.2. Unscrew the nut (2a), fit the tool (2b) and disconnect the steering link (2c) from the wheel strut.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

3. Undo the bolts securing the shock absorber to the wheel strut.4. Undo the bolt securing the steering strut to the lower track control arm.

- Disconnect the strut from the driveshaft.1. Undo the bolts (1a) and remove the right driveshaft (1b) complete with intermediate driveshaft (1c).

Refitting ( Removing

) - Refit the right driveshaft complete with joints and intermediate driveshaft.- Tighten the bolts fixing the right driveshaft to the bearing mounting to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Right-hand bearing supporting driveshaft	Bolt	M8	1.8 ÷ 2.2	1.9 JTD

- Tighten the bolt fixing the steering knuckle to the lower track control arm to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lower track control arm to steering knuckle	Bolt	M10	6.3 ÷ 7.7

- Connect the shock absorber to the knuckle and tighten the new bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber to wheel strut	Bolt (to be replaced)	M10	6.7 ÷ 7.3	1.4 16v1.9 JTD 8v

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber to wheel strut	Bolt (to be replaced)	M12	9.5 ÷ 10.5	1.9 JTD 16v

- Connect the steering link to the steering strut and secure by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Position the ABS rpm sensor in its housing and secure it using the bolt.- Tighten the new wheel hub securing nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut (to replace)	M24	6.6 ÷ 7.3 + 62° +/- 2°

1. Stake the nut.

Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R. Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R. Op. 3310A60 FRONT BRAKE PADS - REPLACE Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 0010T40 CHANGE MANUAL GEARBOX OIL