198002136 - 2710A32 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVESHAFT REMOVED
Removing
(
Refitting
)
Op. 5530A40 ALTERNATOR BRACKETS/MOUNTING/SPACER - R.R 1. Undo the bolts and lift up the engine oil dipstick tube.2. Undo the bolts (2a) and the bolt (2b) and remove the intermediate driveshaft bearing support (2c).
Refitting
(
Removing
)
- Place the intermediate driveshaft bearing support in position and secure it tightening the screws and the bolt to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Intermediate driveshaft bearing support - oil sump side | Bolt | M8 | 2.3 ÷ 2.7 | 1.9 JTD |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Intermediate driveshaft bearing support - crankcase side | Bolt | M10 | 4.5 ÷ 5.5 | 1.9 JTD |