198002138 - 2710A52 DIFFERENTIAL SIDE SLIDING JOINT (ONE) L/H OR R/H - R + R WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT

Removing ( Refitting )

The procedure for the left sliding joint is described below; the operation for the right one are similar and the specific preliminary procedures should be carried out    Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R     Op. 2710A31 INTERMEDIATE DRIVESHAFT - R R

    Op. 2110D74 LEFT DIFFERENTIAL INTERNAL DRIVESHAFT - R + R1. Remove the circlip (1a) and release the three-lobe sliding joint (1b) from the driveshaft.2. Loosen the band (2a) and remove the protective boot (2b). Refitting ( Removing ) - Place the protective boot in its housing and secure it using the band.- Place the three-lobe sliding joint in the housing on the driveshaft and fasten it using the circlip.- Fill the protective boot with the recommended grease.

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal gaiter	Grease (g)	TUTELA STAR 700	NLGI 0-1	70 +/- 5	1.9 JTD

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal gaiter	Grease (g)	TUTELA STAR 700	NLGI 0-1	70 +/- 5	1.4 16v TJet

Component	Type	Description	Classification	Qty.	Validity
Differential-side sliding joint, tulip element side	Grease (g)	TUTELA STAR 700	NLGI 0-1	70 +/- 5	1.9 JTD

Component	Type	Description	Classification	Qty.	Validity
Differential-side sliding joint, tulip element side	Grease (g)	TUTELA STAR 700	NLGI 0-1	70 +/- 5	1.4 16v TJet