198002142 - 3330D26 VACUUM PIPE FOR BRAKE SERVO ASSEMBLY - R.R

Removing ( Refitting )

The vacuum pipe and the brake servo single-acting valve are only available from the Parts Dept. together and cannot be dismantled individually.

    Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Loosen the band and disconnect the vacuum pipe from the vacuum unit. - Disconnect the vacuum pipe for the vacuum reservoir, brake servo vacuum pipe side.1. Open the retaining clip (1a), disconnect the single-acting valve (1b) from the brake servo and remove it together with the pipe. Refitting ( Removing ) - Place the single-acting valve complete with pipe in its housing and connect it to the brake servo.- Close the retaining clip and connect the vacuum reservoir vacuum pipe.- Connect the vacuum pipe to the vacuum unit and tighten the band.    Op. 1016A10 SOUND-PROOFING COVER - R.R