198002213 - 5040D88 CONTROL MOTOR FOR ANY FLAP - R.R. WITH AIR CONDITIONING CASING REMOVED

Removing ( Refitting ) 1. Unscrew the bolts securing the motor.2. Disengage the control shaft and move the motor.

Take care not to move the linkages controlled by the motor.

3. Detach the electrical connection.

	Description	Connector
3	OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR	See N082 OUTSIDE / RECIRCULATION AIR INTAKE FLAP ACTUATOR
3	RIGHT AIR MIXTURE FLAP ACTUATOR	See N079 RIGHT MIXED AIR FLAP ACTUATOR
3	LEFT AIR MIXTURE FLAP ACTUATOR	See N078 LEFT MIXED AIR FLAP ACTUATOR
3	AIR DISTRIBUTION FLAP ACTUATOR	See N080 AIR DISTRIBUTION FLAP ACTUATOR
3	AIR DISTRIBUTION FLAP ACTUATOR - DEFROST	See N083 AIR DISTRIBUTION/DEFROST FLAP ACTUATOR

4. Recover the motor. Refitting ( Removing ) - Check that the motor is not damaged and, if necessary, conduct an electrical test.- Attach the electrical connection.- Position the motor and engage the control shaft.- Tighten the bolts securing the motor.

If an actuator is replaced (with the exception of the actuator controlling air circulation), the flap actuator self-learning procedure must be followed.    See descriptions 5040 AIR CONDITIONING CASING AND COMPONENTS