198002396 - 7025A10 BONNET LID - ALIGNMENT

- Open the bonnet lid.1. If necessary, adjust the buffers.2. If necessary, adjust the position of the lock.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR - If necessary, adjust the bonnet lid position as described below.1. Working from both sides of the vehicle, loosen the bonnet lid bolts and adjust the lid position using the slotted holes in the hinges.

The arrows indicate the possible movements

- After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet lid hinge	Bolt	M6	1.0 ÷ 1.4

- If the operation was not sufficient, proceed as follows:    Op. 7035A16 WINDSCREEN OUTER MOULDING - R.R.1. Working from both sides of the vehicle, loosen the bolts attaching the hinges to the body and adjust the lid position using the slotted holes in the hinges.

The arrows indicate the possible movements.

- After adjustment, tighten the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet lid to bodyshell hinge	Bolt	M8	2.2 ÷ 2.7

- After the adjustment, if necessary, adjust the position of the lock.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR