5505B10 FRONT DOOR WIRING (ONE), LEFT OR RIGHT - R.R. WITH WATER GUARD OR FRAME DETACHED - Fiat - NUOVA BRAVO - eLearn

198003057 - 5505B10 FRONT DOOR WIRING (ONE), LEFT OR RIGHT - R.R. WITH WATER GUARD OR FRAME DETACHED

) Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. 1. Release the electrical connections (1a) and (1b) from the retainer (1c).2. Disconnect the electrical connections (1a) and (1b).

	Description	Connector
1a, 1b	LEFT FRONT DOOR COUPLING	See D030 DRIVER'S FRONT DOOR COUPLING
1a, 1b	RIGHT FRONT DOOR COUPLING	See D031 PASSENGER FRONT DOOR COUPLING

3. Remove the seal (3a) passing the wiring (3b) through the cut (3c).4. Pass the wiring (3b) and the electrical half connections (1a) and (1b) through the opening in the bodyshell until the door can be removed.

1. Detach the electrical connections (1a, 1b).

	Description	Connector
1a	DRIVER''S FRONT DOOR LOCK GEARED MOTOR	See N050 DRIVER'S FRONT DOOR LOCK GEARED MOTOR
1a	RIGHT FRONT DOOR LOCK GEARED MOTOR	See N051 RIGHT FRONT DOOR LOCK GEARED MOTOR
1b	DRIVER''S FRONT ELECTRIC WINDOW MOTOR	See N060 DRIVER'S FRONT ELECTRIC WINDOW MOTOR
1b	RIGHT FRONT ELECTRIC WINDOW MOTOR	See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR

2. Release the wiring retainers from the door frame.3. Release the partition seal from the door frame.4. Extract the wiring by withdrawing it from the front section.

Refitting ( Removing

) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the wiring and fit the duct seal to the door frame.- Connect the wiring retainers.- Connect the electrical connections.- Pass the wiring and the door electrical half connections through the opening in the bodyshell, then connect the electrical connections.- Fit the seal passing the wiring through the cut.- Attach the door electrical connections to the retainer. Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.