Removing
(
Refitting
)
- Position the vehicle on a lift.- Raise the vehicle.1. Disconnect the electrical connection (1a) for the sensor (1b) concerned.
2. Release the retaining tabs (2a) and remove the sensor (1b) involved.
Refitting
(
Removing
)
- Check that the sensor is not damaged.- Place the sensor in position and attach the retaining tabs.- Connect the electrical connection for the sensor.- Remove the vehicle from the lift.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Raise the vehicle.1. Disconnect the electrical connection (1a) for the sensor (1b) concerned.