198003782 - 1820B47 RIGID PIPE FROM MASTER CYLINDER (PUMP) TO VIBRATION DAMPER - R. R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) - Connect a suitable container to the clutch actuator bleed valve and drain all the brake-clutch fluid.1. Unscrew the connector and disconnect the rigid pipe from the clutch pump.- Open the rigid pipe retaining clips. 1. Undo the connector and remove the rigid pipe from the clutch pump to the vibration damper. Refitting ( Removing ) - Place the rigid pipe in position and tighten the clutch pump side and vibration damper side connectors.- Close the rigid pipe retaining clips.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR