198000078 - 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE
Removing
(
Refitting
)
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Position a suitable arm lift underneath the gearbox.1. Open the retaining clips and move the clutch system rigid pipe to one side.2. Undo the bolts (2a) and the nut (2b) and remove the flexible mounting (2c).
Refitting
(
Removing
)
- Fit the flexible mounting and tighten the nut and the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to bodyshell | Bolt (to be replaced) | M10 | 5.4 ÷ 6.6 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to bodyshell | Bolt (to be replaced) | M12 | 7.7 ÷ 9.3 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to rigid support | Nut (to replace) | M12 | 9.0 ÷ 11.0 |