198000221 - 0520G15 COMPRESSION TEST - CHECK WITH EXAMINER WITH SPARK PLUGS/INJECTORS REMOVED

1. Fit the dummy injector (1a) complete with connector (1b).

Tool	Description	Function	Validity
1870897400	Dummy injector	Cylinder compression check	1.9 JTD 16v

Tool	Description	Function	Validity
1870793001	Connector	Transducer Examiner connections

2. Position the injector mounting bracket (2a) and tighten the fixing nut (2b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Injector brackets	Nut	M8	2.3 ÷ 2.8	1.9 JTD 16v

3. Connect the 50 bar transducer (EX 05) for the following tool.

Tool	Description	Function	Validity
1806338000	Transducer Examiner test kit 2	Cylinder compression test

4. Connect the cable (EX 01) for the following tool to the 50 bar transducer and the Examiner SAM card.

Tool	Description	Function	Validity
1806337000	Transducer Examiner test kit 1	Cylinder compression test

Make sure that there are no leaks from the various test equipment connectors.

- Disconnect fuse F21 (15A), located in the additional junction unit in the engine compartment.- Temporarily connect the battery poles.- Select "DIESEL CYLINDER COMPRESSION" on the Examiner in the instrument ambient.- Fully depress the clutch pedal on versions with a manual gearbox or the brake pedal on versions with automatic transmission and turn the engine over using the starter motor until the compression value appears on the Examiner.

To measure the compression pressure, start the engine using a fully charged battery.

- Repeat the test for the remaining cylinders.- Check that there is not a great difference between the pressure readings for the cylinders.